801 Series - Ductile Iron Flanged AWWA C-515 Gate Valves
802IP Series - Ductile Iron UL/FM, Flanged Post Indicator Valve
802 Series - Ductile Iron UL/FM Flanged NRS Gate Valve
UL / FM / AWWA resilient seated gate valves (non-rising stem) are manufactured in accordance with AWWA C515-09 Standard and are Certfied to NSF / ANSI 61 & 372. The UL/FM, AWWA NRS Flange x Flange Valve’s body, bonnet, and wedge are of high strength ductile-iron. The wedge is encapsulated with EPDM rubber.
Stainless steel stem and bolting are standard. Flanges to ANSI B16.1, Class 125. Valves are fusion bonded epoxy coated interior and exterior to AWWA C550 Standard. UL / FM @ 300 psi. Available with Hand Wheel or Operating Nut.
UL / FM / AWWA resilient seated gate valves (non-rising stem) are manufactured in accordance with AWWA C515-09 Standard and are Certfied to NSF / ANSI 61 & 372.
The UL/FM, AWWA NRS Flange x Flange Valve’s body, bonnet, and wedge are of high strength ductile-iron.
The wedge is encapsulated with EPDM rubber. Stainless steel stem and bolting are standard. Flanges to ANSI B16.1, Class 125. Valves are fusion bonded epoxy coated interior and exterior to AWWA C550 Standard. UL / FM @ 300 psi. Available with Hand Wheel or Operating Nut.
Complies with AWWA C515 Standard
Non-Rising Stem
Triple O-rings stem seal
Optional Test Plug
Flanges to ANSI B16.1 Class125. Other flange types available upon request
Working pressure: 300PSI
Working temperature: 42° F - 180° F
Corrosion protection: Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard
Installation: Valves installed in horizontal piping systems should have the stems oriented vertically Valves installed in vertical piping systems should have the stems oriented horizontally
Note: Design and material are subject to change without notice
UL / FM / AWWA resilient seated gate valves (non-rising stem) are manufactured in accordance with AWWA C515-09 Standard and are Certfied to NSF / ANSI 61 & 372.
