Cast and Ductile Iron

View as ListView GridView

Items 1-25 of 51

Set Descending Direction
  1. 915 Series - Posi-Seal Gasket Quickview
    • COMPOUND RUBBER: SBR (STYRENE-BUTADIENE)
    • DUROMETER RATING: 75
    • TENSILE STRENGTH: 600 PSI
    • GAUGE (THICKNESS): 1/8”
    • ELONGATION: 200%
    • ANSI CLASS 125 / 150
    • RATED @ 300 PSI
    • CONFORMS TO AWWA C110 / C111 / C115
    • CONFORMS TO ANSI A21.15 / A21.10 / A21.11
    Learn More
  2. 871 Series - Steel Reducing Companion Flanges Quickview
    • Flange End
    • Class 125
    • ANSI
    • 150 psi
    • Body Cast Iron ASTM 126B
    • Sizes 2" x 1-1/2" to 8" x 6"
    Learn More
  3. 853 Series - Ductile Iron Grooved Wye Strainer Quickview
    • Grooved Ends
    • According to AWWA C606
    • Max Working Pressure 175PSI
    • Working Temp 14° F - 250° F
    • Fusion Bonded Epoxy Coated
    • Sizes: 3” - 12"
    Learn More
  4. 852 Series - Ductile Iron Flanged Wye Strainer Quickview
    • Flanges
    • Class 125
    • ANSI B16.1
    • NSF-61 Approved
    • Max Working Pressure 175PSI
    • Working Temp 14° F - 250° F
    • Fusion Bonded Epoxy Coated Interior/Exterior
    • Sizes: 3" - 12"
    Learn More
  5. 849 Series - Ductile Iron UL/FM Grooved End Style Butterfly Valve w/ Tamper Switch Quickview
    • Vulcanized Disc Design for Bubble-Tight Shutoff at 300 psi
    • Flag Type Position Indicator
    • Low Torque Operation, High Life Cycle
    • Light Weight
    • Stem has Multiple Spline Key Structure, which Transfers Higher Torque Loads and Provides Exceptional Reliability
    • Built-In Supervisory Switch
    • Top Flange Conforms to ISO 5211/1
    • Flanges Conform to ANSI B16.1 Class 125. EN1092-2 PN10/16. (Other Types Available Upon Request)
    • Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard
    Learn More
  6. 848 Series - Ductile Iron UL/FM Wafer Style Butterfly Valve w/ Tamper Switch Quickview
    • Vulcanized Disc Design for Bubble-Tight Shutoff at 300 psi
    • Flag Type Position Indicator
    • Low Torque Operation, High Life Cycle
    • Light Weight
    • Stem has Multiple Spline Key Structure, which Transfers Higher Torque Loads and Provides Exceptional Reliability
    • Built-In Supervisory Switch
    • Top Flange Conforms to ISO 5211/1
    • Flanges Conform to ANSI B16.1 Class 125. EN1092-2 PN10/16. (Other Types Available Upon Request)
    • Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard
    Learn More
  7. 837 Series - Double Door Check Valve UL Listed Quickview
    • Class B 125
    • Pressure Rated: 250 PSI
    • Working Temp 14° F - 302° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Body ASTM A126
    • Sizes 4" to 12"
    Learn More
  8. 826 Series - Ductile Iron Swing Check Valve w/ Lever and Weight Flanged Ends Quickview
    • Flanged Drilling
    • Class 125
    • Complies with AWWA C508 Standard, ANSI B16.1
    • Certified NSF61 & 372
    • Pressure Rated: 250 PSI
    • Working Temperature 42° - 180° F
    • Sizes 2" to 12"
    Learn More
  9. 824 Series - Ductile Iron UL/FM Flanged Swing Check Valve Quickview
    • Flanged Ends
    • Class 125
    • Complies with AWWA C508 Standard, ANSI B16.1
    • UL Listed / FM Approved 300PSI
    • Working Temperature: 42ºF - 180ºF
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Sizes 2" to 12"
    Learn More
  10. 818 Series - Ductile Iron UL/FM Grooved x Flanged OS&Y Gate Valve Quickview
    • Flanged x Grooved Ends
    • High Quality Graphite Stem Seal
    • Class 125
    • Conform to ANSI B16.1 and AWWAC606,
    • Certified to NSF 61 & 372
    • UL Listed and FM Approved 300PSI
    • Working Temp 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Sizes 2-1/2" to 12"
    Learn More
  11. 817 Series - Ductile Iron UL/FM Grooved OS&Y Gate Valve Quickview
    • Grooved x Grooved Ends
    • Stainless Steel Stem AISI420
    • Complies with AWWA C515 Standard
    • Certified NSF61 & 372
    • UL Listed and FM Approved 300PSI
    • Working Temperature 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Sizes 2-1/2" to 12"
    Learn More
  12. 816 Series - Ductile Iron UL/FM Flanged OS&Y Gate Valve Quickview
    • Complies with AWWA C515 Standard
    • Heavy Duty Handwheel and attachment nut
    • High Quality Graphite Stem Seal
    • NPT Plug on Body
    • Flanges to ANSI B16.1, Class 125
    • UL / FM Listed
    • NSF 61 & 372 Approved
    • 300 PSI Working Pressure
    Learn More
  13. 813 Series - UL/FM Vertical Post Indicator - w/ Telescopic Adjustment Quickview
    • The wrench handle fits over a “U” bracket on the barrel and may be fixed with a padlock to secure the operating wrench to the barrel
    • The indicator post provides a means of operating a buried or otherwise inaccessible valve
    • Indicates if valve underneath is in the OPEN or SHUT position
    • Telescopic stem that can be adjusted to its final position without cutting the stem
    Learn More
  14. 812 Series - Wall Indicator Post Quickview
    • UL Listed and FM Approved
    • Used to Operate a Valve Installed Behind a Wall
    • With a 12” O.D. Post Flange to Mount on a Wall
    • The adjustment range of the indicator post is 34.5” to accommodate deeper buried valves and can be easily adjusted in the field
    Learn More
  15. 812IP Series - Vertical Indicator Post Quickview
    • Certified to NSF Listed 61 & 372
    • UL Listed and FM Approved
    • Used to Operate a Valve Installed Behind a Wall
    • With a 12” O.D. Post Flange to Mount on a Wall
    • The indicator post provides a means of operating a buried or otherwise inaccessible valve
    • Indicates if the valve underneath is in the OPEN or SHUT position
    Learn More
  16. 809 Series - Ductile Iron UL/FM NRS Tapping Valve Quickview
    • Flanged & Mechanical Joint Ends
    • Resilient Seat Non-Rising Stem
    • Class 125
    • Complies with AWWA C515 Standard
    • Conform to ANSI B16.1,
    • Certified to NSF 61 & 372
    • UL Listed and FM Approved 300PSI
    • Working Temp 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Sizes 3" to 8"
    Learn More
  17. 807IP Series - Ductile Iron UL/FM Mechanical Joint Post Indicator Valve Quickview
    • Mechanical Joint Ends
    • Resilient Seat Non-Rising Stem
    • Complies with AWWA C515 Standard
    • Mechanical Joint Ends Conform to ANSI B16.1, Class 125
    • Certified to NSF 61 & 372
    • Working Temp 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Sizes 3” – 14”
    Learn More
  18. 807 Series - Ductile Iron UL/FM Mechanical Joint NRS Gate Valve Quickview
    • Mechanical Joint Ends
    • Resilient Seat Non-Rising Stem in Stainless Steel 420 AISI
    • Class 125
    • Complies with AWWA C515 Standard, ANSI B16.1
    • Certified to NSF 61 & 372
    • UL Listed and FM Approved 300PSI
    • Working Temp 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Indicator Post Style
    • Sizes 3” – 14”
    Learn More
  19. 803 Series - Ductile Iron UL/FM Flanged x Mechanical Joint NRS Gate Valve Quickview
    • Mechanical Joint x Flanges
    • Resilient Seat, Non Rising Stem
    • Class 125
    • Complies with AWWA C515 Standard, ANSI B16.1
    • UL Listed / FM Approved 300PSI
    • Working Temp 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • NSF Listed
    • Sizes 3” – 12”
    Learn More
  20. 802IP Series - Ductile Iron UL/FM, Flanged Post Indicator Valve Quickview
    • Resilient Seat Non-Rising Stem
    • Complies with AWWA C515 Standard
    • Certified to NSF Listed 61 & 372
    • Working Temp 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Size 2” – 12”
    Learn More
  21. 802 Series - Ductile Iron UL/FM Flanged NRS Gate Valve Quickview
    • Flanges Conform
    • Resilient Seat Non-Rising Stem
    • Class 125
    • Complies with AWWA C515 Standard, ANSI B16.1
    • Certified to NSF Listed 61 & 372
    • UL Listed / FM Approved 300PSI
    • Working Temp 42° - 180° F
    • Fusion Bonded Epoxy Coated Interior/Exterior to AWWA C550
    • Indicator Post Style
    • Size 2” – 12”
    Learn More
  22. 1080 Series - Cast Iron Flanged Ball Check Valve Quickview
    • Fusion Bonded Epoxy
    • Flanges Conform To ANSI B16.1 / Class 125
    • Rated @ 232 PSI
    • Rubber Coated Aluminum Ball
    • Low-Pressure Functionality
    Learn More
  23. 1041 Series - Cast Iron Flanged Butterfly Valve Quickview
    • Class 125
    • Seat Area with Welded Overlay, Minimum 90% Pure Nickel
    • Shaft Sealed by the Multiple V-Ring Type
    • Bearings of Sintered SS316, Oil Impregnated, Permanently Lubricated
    • Available with Flange to EN1092-2 PN16 ANSI B16.1
    • Class 123 (Others Available Upon Request)
    • With Mechanical Joint AWWA / ANSI C153 / A21.53-00
    Learn More
View as ListView GridView

Items 1-25 of 51

Set Descending Direction